Customer Technical Support

The Wide Flange Base Mount is used to secure the POV via Camera Head to several surfaces. The plate has screw holes in each corner so that it can be screwed down to hold it in place. It also has grooves along all four sides to provide more flexibility in mounting the base. You can also use these grooves to feed straps through, and then strap the base mount down to a flat surface. On the bottom of the Wide Flange Base Mount there is a 1/4-20 (standard tripod size) attachment hole for attaching the Wide Flange Base Mount to tripods.

Instructions:
To use the Wide Flange Base Mount with the POV.1 or the POV 1.5 you will need to use the C-Clamp to hold the camera to the mount. For instructions on how to attach the camera head to the C-Clamp please go here.

To mount the C-clamp to the Wide Flange Base Mount remove the thumb screw from the C-Clamp.

C-Clamp Thumb Screw

Next slide the fixture over the rail so the screw-pin will be aligned with the groove in the rail, and then insert the screw-pin and tighten it to hold the C-Clamp in place. Once the C-Clamp is securely mounted to the base the end product will look like this:

Note:The Wide Flange Base Mount can also be used with the double hook and loop patch and the adhesive foam patch, either separately or together. Using the adhesive pad with the hook and loop patch will provide better image stabilization.

Tags: Mount, Product, Wide Flange, Wide Flange Base, Wide Flange Base Mount