C-Clamp
The POV.T and the 110° and 70° camera heads come with a C-clamp mount, which can be used to mount the camera head to Picatinny rails as well as V.I.O. Inc’s Wide Flange Base Mount, Tubular Rail Mount, and ARC Mounts.
To use the C-Clamp:
| Slide the cable end of the camera head into the mount first, gently pushing the Camera Head into the mount towards the lens of the camera head. |
 |
|
Make sure the white line that marks the top of the camera head is facing up (the top refers to the top of the video frame that is captured by the camera). Place the O-ring on the top of the C-Clamp to further secure the camera head in the clamp. |
 |
Attaching the C-Clamp to a Rail:
The C-clamp fixture is designed to work rails that conform to the Picatinny rail system that is commonly used in the firearms industry. Most rifle based and some helmet based mounting systems umploy this style of rail. For exact specifications of the Picatinny rails system please go here.
The C-clamp fixture has a large screw-pin in the bottom that is used for holding the fixture in place on the base mount. To mount the C-clamp on a rail mount remove the screw-pin from the C-Clamp, slide the fixture over the rail so the screw-pin will be aligned with the groove in the rail, and then insert the screw-pin and tighten it to hold the C-Clamp in place.
Compatible mounts offered by VIO Inc:
| The Wide Flange Base Mount | The Tubular Rail Mount |
|---|---|
 |
 |