Analog AV Cable
Connecting the POV.1.5 to a TV or Other Video Device
You can output video from the POV.1.5 to a TV or any standard video device that accepts a composite video-in signal such as a VCR or DVD recorder. Video can be played on both the POV.1.5’s built-in display and an external video device simultaneously.
A color-coded analog video cable is included with the POV.1.5 for connecting the unit to a television monitor or other video device.
One end of the cable has a 1/8th inch mini phono jack and plugs into the bottom of the POV.1.5 in the Input/Output Port area (you will need to remove the Input/Output Port cover to access this connector).
The other end of the video output cable is color coded with a yellow RCA connector for video out and a white RCA connector for audio out. These can be plugged into a composite input jack on a TV or other video device. See your TV or video device manual for details about selecting the input as the video source.
NOTE: The POV.1.5 outputs video in both the NTSC and PAL video formats.
In the U.S. the format standard is NTSC and in Europe the standard is PAL.
To change from NTSC format to PAL:
- Press the SETTINGS button on the POV.1.5
- Press the NXT soft key until VIDEO OUTPUT is shown in the display, and press SELECT
- Use PREV or NXT to choose the appropriate setting, and then press SELECT
If you set the format to PAL you should also change the FRAME RATE setting to
25 frames per second to optimize PAL video playback.
- Press the SETTINGS button on the POV.1.5
- Press the NXT soft key until FRAME RATE is shown in the display, and press
SELECT - Use PREV or NXT to choose 25, and then press SELECT